What gutter work should cost

Typical gutter cleaning costs (by home height and gutter length)

Most gutter cleaning is priced by how much linear footage you have and how hard it is to reach (usually based on one- vs two-story height and roof pitch).

As a general planning range, single-story homes often fall around $120–$250 for cleaning, while two-story homes often fall around $200–$400. If you’re measuring by gutter length, many homeowners see typical pricing around $0.80–$2.50 per linear foot, with the total increasing when there’s heavy debris.

If your gutters are clogged with wet leaves, mud, or seeds, expect the job to take longer. If a pro also needs to clear downspouts, do a quick check of drainage, or handle extra access needs, costs can be higher.

What drives the price up: two stories, steeper roofs, harder-to-reach corners, lots of debris, and added time for downspouts.

Gutter guard costs (per linear foot, by type)

Gutter guards reduce how often you need cleaning, but they don’t eliminate it. Even high-quality systems can collect fine debris and may still require periodic maintenance.

Typical planning ranges per linear foot are often roughly:

• Screen/mesh: about $2–$5 per linear foot (often the lowest-cost option)

• Micro-mesh and similar fine-mesh types: about $6–$10 per linear foot (more protection against small debris, usually pricier)

• Reverse-curve (water sheds over the guard while debris is blocked): about $8–$15 per linear foot (commonly higher due to material and installation complexity)

Also, if your current guards must be removed before installing new ones, that removal labor can increase the price.

What drives the price up: your home height (one vs two story), roof slope/pitch, how many feet need coverage, whether old guards come off, and the guard style you choose.

Seamless gutter installation (per linear foot, by material)

Seamless gutters are custom-cut on-site, which is why they’re often priced per linear foot. Pricing also depends on the gutter material and how much prep work is needed at the fascia (the board that gutters attach to).

Typical planning ranges for seamless gutter installation are often around $10–$30 per linear foot. The same home can land higher or lower depending on:

• Material type (for example, aluminum vs other materials)

• Extra components (end caps, hangers, splash guards)

• The condition of fascia and any repairs needed before installation

Height and access matter too. If your roofline is steep or the installation requires more careful work from ladders, expect higher labor.

What drives the price up: two stories, steep roofs, more linear feet, difficult angles, and any prep or correction work needed before hangers can be set securely.

Downspout repair and rerouting costs

Downspouts are the vertical pipes that move water away from your home. Repair costs vary based on what’s broken and whether water needs a new path.

Typical planning ranges for downspout repair/rerouting are often roughly:

• Small repair (section replacement, re-attachment, fixing a joint or strap): about $150–$350

• Rerouting/repositioning (moving the downspout outlet or changing where it discharges): about $300–$700+

If the work includes connecting to existing drainage components, redirecting around landscaping, or addressing areas where water currently goes the wrong way, the job can take longer.

What drives the price up: the height of the downspout run, how many sections need replacement, complicated routing around obstacles, and whether the crew must remove or loosen existing components.

Resealing and re-hanging gutters (often mid-range vs full replacement)

When gutters sag, pull away, or leak at seams and joints, some homeowners only need targeted repairs. Two common categories are resealing and re-hanging.

Typical planning ranges often look like:

• Resealing (seams/joints/leaks): about $200–$500

• Re-hanging/adjusting pitch and hangers: about $300–$800+

These costs can rise if the gutters are in poor condition, if there’s extensive leak tracing, or if hangers need more thorough replacement.

What drives the price up: older systems, multiple leak points, extensive resecuring needed along the run, and harder access.

Avoid overpaying: red flags and questions to ask

Good gutter companies explain the scope clearly. You should be able to understand what’s included, what’s not included, and what measurements they used.

Be cautious of door-to-door pressure. If someone won’t slow down and let you get a written scope, that’s a sign to pause. Also be wary of “one price for everything” promises without measuring your gutter length and discussing the real condition (debris level, downspout clogs, current guards, and access).

A few smart questions:

• “Did you measure my linear feet?”

• “What’s included in the scope (gutters only vs downspouts, removal of old guards, extra access)?”

• “What type of guard is it, and what does it do / not do?”

• “Can you put the scope and total price in writing before any work starts?”

Bottom line: the ranges above are general info, not quotes. Your final price depends on your home and the work scope. The safest move is to get the price and scope in writing.